i ntegrated c ircuits d ivision www.ixysic.com ds-CPC1983YE-r02 1 e 3 pb CPC1983YE normally open power sip relay part # description CPC1983YE power sip package (25 per tube) parameter rating units blocking voltage 600 v p load current 0.5 a rms / a dc on-resistance (max) 6 ? input / output isolation 4 kv applications features description ordering information pin configuration ? industrial controls ? motor control ? robotics ? medical equipment?patient/equipment isolation ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? ic equipment ? home appliances ? 4000v rms input/output isolation ? handle load currents up to 0.5a ? 600v p blocking voltage ? power sip package ? high reliability ? no moving parts ? low drive power requirements (ttl/cmos compatible) ? arc-free with no snubbing circuits ? no emi/rfi generation ? machine insertable, wave solderable ixys integrated circuits division and its parent, ixys, have combined to bring optomos ? technology, reliability, and compact size to a new family of high-power solid state relays. as part of this family, the CPC1983YE single-pole normally open (1-form-a) solid state power relay is rated for up to 0.5a dc / 0.5a rms continuous load current. the CPC1983YE employs optically coupled mosfet technology to provide 4000v rms of input to output isolation. the optically coupled outputs, that use patented optomos architecture, are controlled by a highly efficient gaaias infrared led. this combination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance switching applications. the "e" suffix signifies an enhanced isolation voltage. switching characteristics of normally open devices approvals ? ul recognized component: file e69938 form-a i f i load 10% 90% t on t off
i ntegrated c ircuits d ivision www.ixysic.com 2 r02 CPC1983YE absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings @ 25oc parameter ratings units blocking voltage 600 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 150 mw total power dissipation 2 1600 mw isolation voltage, input to output 3 4000 v rms esd rating, human body model 8 kv operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 3.33 mw / oc 2 derate linearly 16.667 mw / oc 3 ul file 69938 is only rated by ul to 2500v rms . parameter conditions symbol min typ max units output characteristics load current, continuous i f =5ma, free air i l - - 0.5 a rms / a dc peak load current i f =5ma, t=10ms i lpk - - 3 a p on-resistance 1 i f =5ma, i l =0.5a r on - 3.5 6 ? off-state leakage current i f =0ma, v l =600v p i leak --1a switching speeds turn-on i f =5ma, v l =10v t on - 2.2 5 ms turn-off t off - 0.15 2 output capacitance i f =0ma, 50v, f=1mhz c out -41-pf input characteristics input control current to activate i l =0.5a i f - 1.3 5 ma input control current to deactivate - i f 0.5 - - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r - - 10 a input/output characteristics capacitance input/output f=1mhz c i/o -2-pf 1 measurement taken within 1 second of on-time. electrical characteristics @ 25oc parameter conditions symbol min typ max units thermal resistance (junction to case) - r ? jc - 1.5 - c/w thermal characteristics
i ntegrated c ircuits d ivision CPC1983YE www.ixysic.com 3 r02 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. led forward volta g e ( v ) 1.235 1.240 1.245 1.250 1.255 1.260 1.265 device count (n) 0 5 10 15 20 25 30 typical led forward voltage drop (n=50, i f =5ma, t a =25oc) turn-on time (ms) 1.75 1.90 2.05 2.20 2.35 2.50 device count (n) 0 5 10 15 20 25 typical turn-on time (n=50, i f =5ma, i l =75ma, t a =25oc) turn-off time (ms) 0.131 0.138 0.145 0.152 0.159 0.166 device count (n) 0 5 10 15 20 25 typical turn-off time (n=50, i f =5ma, i l =75ma, t a =25oc) led forward current (ma) 1.0 1.1 1.2 1.3 1.4 1.5 device count (n) 0 5 10 15 20 25 typical i f for switch operation (n=50, i l =500ma, t a =25oc) on-resistance ( : ) 3.25 3.35 3.45 3.55 3.65 3.75 3.85 device count (n) 0 5 10 15 20 25 typical on-resistance distribution (n=50, i f =5ma, i l =500ma, t a =25oc) blocking voltage (v p ) 675 685 695 705 715 725 735 device count (n) 0 5 10 15 20 typical blocking voltage distribution (n=50, i f =0ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 led forward voltage (v) 1.1 1.2 1.3 1.4 1.5 1.6 typical led forward voltage drop vs. temperature i f =50ma i f =20ma i f =10ma i f =5ma led current ( ma ) 0 1020304050 turn-on time (ms) 0 1 2 3 4 5 6 typical turn-on time vs. led forward current (i l =75ma, t a =25oc) led current (ma) 0 1020304050 turn-off time (ms) 0.06 0.08 0.10 0.12 0.14 0.16 typical turn-off time vs. led forward current (i l =75ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 led current (ma) 0.8 1.0 1.2 1.4 1.6 1.8 typical i f for switch operation (i l =300ma) temperature (oc) -40 -20 0 20 40 60 80 100 turn-on time (ms) 0.5 1.0 1.5 2.0 2.5 3.0 typical turn-on time vs. temperature (i l =75ma) i f =10ma i f =5ma temperature (oc) -40 -20 0 20 40 60 80 100 turn-off time (ms) 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 typical turn-off time vs. temperature (i l =75ma) i f =5ma i f =10ma
i ntegrated c ircuits d ivision www.ixysic.com 4 r02 CPC1983YE performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. temperature (oc) -40 -20 0 20 40 60 80 100 on-resistance ( : ) 2.5 3.0 3.5 4.0 4.5 5.0 typical on-resistance vs. temperature (i f =5ma, i l =300ma) load voltage (v) -3 -2 -1 0 1 2 3 load current (a) -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 typical load current vs. load voltage (i f =5ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 load current (a) 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 maximum load current vs. temperature (i f =5ma) temperature (oc) -40 -20 0 20 40 60 80 100 blocking voltage (v p ) 640 660 680 700 720 740 760 typical blocking voltage vs. temperature temperature (oc) -40 -20 0 20 40 60 80 100 leakage (na) 0 20 40 60 80 100 typical leakage current vs. temperature (v l =600v) load voltage (v) 0 50 100 150 200 output capacitance (pf) 0 200 400 600 800 1000 1200 output capacitance vs. load voltage (i f =0ma, f=1mhz, t a =25oc) time 10 p s 100 p s 1ms 10ms 100ms 1s 10s 100s load current (a) 0 1 2 3 4 5 6 energy rating curve
i ntegrated c ircuits d ivision CPC1983YE www.ixysic.com 5 r02 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. ixys integrated circuits division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating CPC1983YE msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time CPC1983YE 245oc for 30 seconds board wash ixys integrated circuits division recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since ixys integrated circuits division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. e 3 pb
i ntegrated c ircuits d ivision ixys integrated circuits division makes no representations or warranties with respect to the accuracy or completeness of the co ntents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity a re expressed or implied. except as set forth in ixys integrated circuits division?s standard terms and conditions of sale, ixys integrated circuits division assumes no liability whatsoever, a nd disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringem ent of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of ixys integrated circuits division?s product may resul t in direct physical harm, injury, or death to a person or severe property or environmental damage. ixys integrated circuits division reserves the right to discontinue or make changes to its p roducts at any time without notice. specification: ds-CPC1983YE-r02 ?copyright 2012, ixys integrated circuits division optomos ? is a registered trademark of ixys integrated circuits division all rights reserved. printed in usa. 12/17/2012 for additional information please visit our website at: www.ixysic.com 6 CPC1983YE mechanical dimensions dimensions mm (inches) 1.150 dia. x4 (0.045 dia. x4) 2.540 (0.100) pin 1 10.160 (0.400) 5.080 (0.200) 1.75 (0.069) 10.1600.127 (0.4000.005) 21.0820.381 (0.8300.015) 4.5720.127 (0.1800.005) 1.0160.127 (0.0400.005) 10.1600.127 (0.4000.005) 1.778 (0.070) 5.0800.127 (0.2000.005) 2.5400.127 (0.1000.005) 0.7620.076 (0.0300.003) 1.6510.102 (0.0650.004) 7o typ 4 places 7o typ 4 places 3.3020.051 (0.1300.002) 0.3810.013 (0.0150.0005) 1.778 (0.070) pcb hole pattern pin 1 CPC1983YE
|
